Nissan 350 Z -2002-2009 Hardtop/Replacement Convertible Top

Nissan 2002 to 2009 350Z

350 Z Removable Hardtop

Base Model Only $1899.00

Buy Now

Description

Thumbs Up Approval

The extremely low profile of the Hardtop gives the 350 ZR a very aggressive performance oriented attitude. The Smooth Line design compliments the 350Z’s good looks. From any angle the sleek aerodynamic super car styling of the Hardtop will turn heads with thumbs up approval.

#1 Performance Option

Adding a removable Hardtop is the most exciting and practical improvement that can be made to your 350ZR. The #1 performance option is designed for action. Change your wind-in-the-hair boulevard cruiser into a super coupe in minutes. Simply lower the convertible top in the normal position (the convertible top does not have to be removed) and latch the Hardtop in place. Now you can experience the full potential of your 350Z on the street, strip or track.

Enjoyable in Any Season

When the weather is fair and the top is down, nothing beats the joy of driving a convertible! If the weather is too hot, too cold, too wet, or if you are on long drive on the freeway, you just can't beat a Smooth Line Hardtop. Now you can have the best of both worlds! Driving can be enjoyable in any season with the quiet comfort and security from the Smooth Line Hardtop. A perfect replacement for that leaky convertible top.

Don't let a bad looking, leaking convertible top de-value your car! Mold starts and the rust begins! STOP the hassles, bring back the pride and joy of ownership. Protect your investment with a life time solution.

Install a Smooth Line Hardtop now!

"The last top you will have to buy."

Bad Boy Low Stretched Roof Line

The Smooth Line 350Z removable Hardtop accentuates the low silhouette of the Z with an extended, pulled back, roof line for a “Bad Boy” attitude featuring a curved flush mount rear window that is 50% larger than the convertible for greater visibility and a very sleek look.

The base Smooth Line Hardtop

Exterior: Surface "as molded", ready to finish using normal body shop techniques before painting a top coat color of your choice by your local body shop.

The interior: Is upholstered in a thick OEM felt automotive headliner material available in a variety of colors that will compliment the interior of your car. This headliner significantly absorbs road noises and also is an excellent insulator against heat or cold. Now you will be able to have normal conversation or really enjoy your favorite music on your stereo. Great on long drives!

Everything is included: Latches, soft rubber weather seals, exterior rain guards and rear window to insure a "factory" look, fit and finish.

Attachment : Easy to turn tightening knobs with corrosion resistant steel hardware. Very easy and requires only minutes. No tools are required. The Smooth Line Hardtop only weighs approximately 35-40 lbs. and is easy to handle.

All Smooth Line Hardtops are custom made to order. Included in shipping cost is heavy duty packaging for world wide shipping. North American shipments are via truck and overseas are either via air or ocean. Freight cost is additional. Ask for our special discounted freight quotation.

Standard Features

Base Model

HARDTOP SHELL

High strength, light weight, precision molded, hand laid, oven cured fiberglass composite. Approximately 40 lbs. Easy to lift on and off.
Premium automotive grade materials
Exterior rain guards.

Exterior Finish ( Base Model)

Sand-able surface designed for easy finishing using normal body shop technics.
Many exterior upgrade options available.

Interior (Base Model)

The interior is fully upholstered with a thick charcoal grey color automotive headliner.
Improved sound and insulating properties compared to the convertible top. Upgrade options available

Rear Window (Base Model)

Clear Plexiglas ( 1/8" thick- same as glass)
This light weight impact resistant acrylic material will not discolor or become foggy and with reasonable care will last for years.
Upgradable to tinted Plexiglas or AS-2 Safety Glass with defogger

Attachment Hardware

The front and rear mounting system is custom designed for the 350 Z.
All metal components are made of high strength corrosion resistant steel and are designed to provide a simple, secure, and professional fitting Hardtop.
This application does not require any modification to the vehicle and is easy to install.
Once installed the hardtop can be easily removed or reattached in minutes without any tools.

Weather Seals

Custom extruded rubber moldings are matched to the windshield, rear deck and side window to ensure a weather tight seal.
These OEM quality materials are resistant to sunlight aging, water absorption, and ozone.

Options / Up Grades

Exterior Options

SANDABLE EXTERIOR FINISH: Base Model

DESIGNED FOR THE DIY OR PROFESSIONAL BODY PERSON Sandable "as molded" surface with some slight surface irregularities, mold seams, etc. Bodywork will be required

to make paint ready, block sanding, filling, priming, and fitting to car before painting. Rear window, exterior moldings, and seals are to be installed after painting. These hardtops are shipped complete with all parts.

PRIMED EXTERIOR FINISH: Upgrade $300.00 extra

RECOMMENDED FOR A PAINTED FINISH.

Smooth Line hardtops are available with a smooth, black urethane primer ready for color topcoat. “Ready for topcoat’

means that the body shop will have a minimum of prep before spraying the color coat. Absolutely no body work will be

necessary. Our prime coating is compatible with all top coats. Color matching is an art! We have found the most accurate

color match can be achieved at a quality body shop which uses the latest computer equipment to match the color on your vehicle. Rear window, exterior moldings, and seals are to be installed after painting. These hardtops are shipped complete with all parts.

Are there any other options for the exterior other than painting?

FLAT BLACK FINISH: Upgrade $350.00 extra

RECOMMENDED AS THE MOST ECONOMICAL CHOICE,

READY TO INSTALL ON YOUR CAR
Almost flat black finish, very low sheen, reminds one of hot rod primer as seen on the latest exotics. Not paint, this tough composite vinyl material, factory bonded to the hardtop fiberglass shell, is extremely durable, super easy to maintain and will probably outlast your car. No need for painting! All exterior moldings and windows are factory installed. These hardtops are shipped complete with all parts, ready for easy installation and use.

HAARTZ VINYL EXTERIOR FINISH: Upgrade $400.00 extra

READY TO INSTALL ON YOUR CAR

This upgrade is truly distinctive and reminds one of the roof treatments of the 60’s Muscle cars. Tightly stretched, " Classic" sewn seams front to rear,. Very understated subtle appearance. (Not your grandfather’s Lincoln). There is no need for painting with the vinyl exterior option. Haartz Brand is world renown as the premium automotive vinyl, a very tough material that usually outlasts painted finishes! All exterior moldings and windows are factory installed. These hardtops are shipped complete with all parts, ready for easy installation and use.

Color choices.

CARBON FIBER TEXTURED EXTERIOR FINISH: Upgrade $400.00 extra

READY TO INSTALL ON YOUR CAR
High tech look! Three dimensional, with amazing light reflecting qualities. Low gloss, marine grade, not a film, won’t yellow or craze. This factory installed textured covering is a very tough material, usually lasts as long as a painted finish! All exterior moldings and windows are factory installed. These hardtops are shipped complete with all parts, ready for easy installation and use. (See Video)

INTERIOR OPTIONS

Upholstered in a thick OEM felt automotive headliner material that will compliment the interior of your car. This headliner significantly absorbs road noises and also is an excellent insulator against heat and cold. Now you will be able to have a normal conversation or really enjoy your favorite music. Great on long drives!

CHARCOAL GREY: Base Model

BLACK OR TAN: Upgrade $150.00 extra

3x thicker than base. Very plush.

Improved sound and insulating properties compared to the convertible top.

REAR WINDOW OPTIONS

CLEAR PLEXIGLAS (1/8" thick-same as glass) Base Model

This light weight impact resistant acrylic material will not discolor or become foggy and with reasonable care will last for years.

TINTED PLEXIGLAS: Upgrade $75.00 extra

Dark tint. Great for privacy, bright sunlight or bothersome high beams.

AS-2 SAFTEY GLASS w/ Defog: Upgrade $300.00 extra complete with plug and play wiring extensions.